Deployment
|
Before starting procedures in this guide, make sure to complete the basic setup of the FortiVoice phone system and connect to the GUI of that system. For more details, see the FortiVoice Phone System Administration Guide. |
To deploy an FXO gateway and manage that device with a FortiVoice phone system, review the tasks and perform the procedures listed in the following workflow:
|
Task sequence |
Description |
Procedure |
|---|---|---|
|
Perform tasks 1 to 4 on the FXO gateway. |
||
|
Task 1 |
Perform the following actions to complete the initial setup of the FXO gateway:
|
|
|
Task 2 |
Connect to the GUI of the FXO gateway |
|
|
Task 3 |
Configure the following system settings:
|
|
|
Task 4 |
Upgrade the firmware of the FXO gateway to the latest GA release. |
|
|
Perform tasks 5 to 12 on the FortiVoice phone system, as applicable. |
||
|
Task 5 |
Add an FXO gateway. The FortiVoice phone system can auto-discover an FXO gateway when they are both on the same LAN. |
Perform one of the following procedures: |
|
Task 6 |
Apply the gateway configuration file from the FortiVoice phone system to the FXO gateway. |
|
|
Task 7 |
Verify the association of the FXO gateway with the FortiVoice phone system. |
|
|
Task 8 |
Add a trunk profile to an inbound dial plan. |
|
|
Task 9 |
Add a trunk profile to an outbound dial plan. |
|
|
Task 10 |
Verify the configuration by making test calls. |
|
|
Task 11 |
Optionally, edit a trunk profile. |
Optional - Editing a trunk profile for an FXO gateway |
|
Task 12 |
Optionally, create an additional trunk profile. |
Optional - Creating an additional trunk profile for an FXO gateway |