Mapping a SIP peer with the FortiVoice Gateway
Mapping Rule allows for calls to be made from a SIP peer to the FortiVoice Gateway and then out on an analog trunk. Likewise, calls can come in on an analog trunk and be answered through the SIP peer. When creating a mapping rule, you are linking the analog trunks to the SIP peer or link analog extensions to SIP peers, depending on the platform.
To add a mapping rule
- Go to Gateway > Mapping Rule.
- Click New.
- Configure the following fields:
GUI field
Description
Enabled
Select to activate the rule.
PSTN trunk (GO08 only)
Select the analog trunk profile that you want to map to the SIP peer.
SIP peer
Select the SIP trunk profile that you want to map to the PSTN trunk.
PRI trunk (GT01 & 02 only)
Select the PRI trunk profile that you want to map to the SIP peer.
Extension (GS16 only)
Select the analog extension that you want to map to the SIP peer.
Comments
Enter any comments you have for this mapping rule.
- Click Create.