Workflow
|
Before starting procedures in this guide, make sure to complete the basic setup of the FortiVoice phone system and connect to the web-based manager of that system. For more details, see the FortiVoice Phone System Administration Guide. |
To deploy an FXO gateway and manage that device with a FortiVoice phone system, review the tasks and perform the procedures listed in the following workflow:
|
Task sequence |
Description |
Procedure |
|---|---|---|
|
Perform tasks 1 to 4 on the FXO gateway. |
||
|
Task 1 |
Perform the following actions to complete the initial setup of the FXO gateway:
|
|
|
Task 2 |
Connect to the web-based manager of the FXO gateway |
|
|
Task 3 |
Configure the following system settings:
|
|
|
Task 4 |
Upgrade the firmware of the FXO gateway to the latest GA release. |
|
|
Perform tasks 5 to 12 on the FortiVoice phone system, as applicable. |
||
|
Task 5 |
Add an FXO gateway. |
Perform one of the following procedures: |
|
Task 6 |
Apply the gateway configuration file from the FortiVoice phone system to the FXO gateway. |
|
|
Task 7 |
Verify the association of the FXO gateway with the FortiVoice phone system. |
|
|
Task 8 |
Add a trunk profile to an inbound dial plan. |
|
|
Task 9 |
Add a trunk profile to an outbound dial plan. |
|
|
Task 10 |
Verify the configuration by making test calls. |
|
|
Task 11 |
Optionally, edit a trunk profile. |
Optional - Editing a trunk profile for an FXO gateway |
|
Task 12 |
Optionally, create an additional trunk profile. |
Optional - Creating an additional trunk profile for an FXO gateway |