Applying the PRI gateway configuration
The FortiVoice phone system stores a gateway configuration file. Perform this procedure to apply the gateway configuration file to the PRI gateway.
|
Prior to applying the configuration file, make sure that the FortiVoice phone system and PRI gateway are running the 6.0.x firmware version. Supported setup examples for Apply Configuration:
Unsupported setup example for Apply Configuration:
To verify the firmware version, go to Dashboard > Status. In the System Information widget, go to Firmware version. |
Procedure steps
- In the GUI of the FortiVoice phone system, go to Managed System > Gateway, and then click the PRI Gateway tab.
- Review the list to find and select the gateway to which you want to apply the configuration file.
- Click Apply Configuration.
- Click OK.
- Click OK.
You have completed this procedure.
- Go to Verifying the PRI gateway configuration.
The FortiVoice phone system displays the following message:
Do you really want to update selected gateway?
The FortiVoice phone system applies configuration changes to the PRI gateway.
With a successful update, the PRI gateway displays the following message:
Gateway upgrade finished.
Successful:<gateway_name>