Deployment
|
Before starting procedures in this guide, make sure to complete the basic setup of FortiVoice Cloud and connect to its GUI. For details, see the FortiVoice Cloud Basic Administration Guide and FortiVoice Cloud Advanced Administration Guide. |
To deploy an FXO gateway and manage that device with FortiVoice Cloud, review the tasks and perform the procedures listed in the following workflow:
|
Task sequence |
Description |
Procedure |
|---|---|---|
|
Perform tasks 1 to 4 on the FXO gateway. |
||
|
Task 1 |
Perform the following actions to complete the initial setup of the FXO gateway:
|
|
|
Task 2 |
Connect to the GUI of the FXO gateway |
|
|
Task 3 |
Configure the following system settings:
|
|
|
Task 4 |
Upgrade the firmware of the FXO gateway to the latest GA release. |
|
|
Perform tasks 5 to 10 on FortiVoice Cloud, as applicable. |
||
|
Task 5 |
Add an FXO gateway. |
|
|
Task 6 |
Apply the gateway configuration file from FortiVoice Cloud to the FXO gateway. |
|
|
Task 7 |
Verify the association of the FXO gateway with FortiVoice Cloud. |
|
|
Task 8 |
Add a trunk profile to an inbound dial plan. |
|
|
Task 9 |
Add a trunk profile to an outbound dial plan. |
|
|
Task 10 |
Verify the configuration by making test calls. |
|