Starting an Amazon S3 test
The Amazon S3 test simulates Amazon S3 (Simple Storage Service) traffic, such as file uploading and downloading, and folder creating.
To start an Amazon S3 test:
- Go to Cases > Performance Testing > Application > Amazon S3 to display the test case summary page.
- Click + Create New to display the Select case options dialog box.
- In the popup dialog, for the Network Config option, select the network template you have created in Cases > Security Testing > Objects > Networks. Then the network related options will automatically be filled. See Using network configuration templates for how to create a network template.
- Select a Certificate Group if applicable.
- Select Protocol type of the simulated traffic.
- Click OK to continue.
- Configure the test case options described below.
- Click Start to run the test case.
FortiTester saves the configuration automatically so you can run the test again later. You can also click Save to save the test case without running it.
|
Tip 1: You can also copy an existing case, and change its settings to create a new case. In the case list, click Clone to clone the configuration. Only the case name is different from the original case. Tip 2: You can add or edit a comment when the test is running. This comment can be used to search for the test result in the Results page. This is useful especially when the test runs for a long time. |
Application Test Case common options
Application Test Case configuration specific to Amazon S3 Test
| Settings | Guidelines |
|---|---|
| Client Profile | |
| Amazon S3 Command List | Select the commands that will be sent in one TCP stream. |
| Amazon S3 Fixed Format |
If it is enabled, FortiTester will generate traffic data before sending data to the target device, and the data will not be changed during the testing phase. It can improve the performance of FortiTester. If it is disabled, FortiTester will generate traffic data dynamically in the testing phase. |
| Amazon S3 Bucket Name (Folder Name) | User can set the bucket name, the bucket name is similar to a folder name |