SNMP Monitors

FortiTester allows you to monitor a FortiGate device under test (DUT) from the management interface. To do so, you must create a DUT monitor object template and then import it when you configure test settings.

To create a DUT monitor object template:

1. Go to Performance Testing or Security Testing > Objects > SNMP Monitors.
2. Click + Create New to display the configuration page.
3. Configure the following settings:

• Name—The name of your DUT monitor object template
• Management IP—The monitored DUT IP address
• Community Name—The community name you choose for the DUT
• Monitor Setting—The name and OID for the DUT.
  You can customize the OIDs by clicking or click to delete the OID.
  
  
  

Click Save to save the configuration.

After you have created a DUT monitor template, you can clone or export it as a zip file. This template can be selected from the DUT Monitor option when creating a test. If it is selected, you can monitor the DUT from the DUT Monitor tab on the management interface.