Introduction
This document provides the following information for FortiSwitch 7.2.5 devices managed by FortiOS 7.2.6 build 1575:
See the Fortinet Document Library for FortiSwitchOS documentation.
Refer to the FortiLink Compatibility table to find which FortiSwitchOS versions support which FortiOS versions.
NOTE: FortiLink is not supported in transparent mode.
The maximum number of supported FortiSwitch units depends on the FortiGate model:
| FortiGate Model Range | Number of FortiSwitch Units Supported |
|---|---|
| FortiGate 40F, FortiGate-VM01 | 8 |
| FortiGate 6xE, 8xE, 90E, 91E | 16 |
|
FGR-60F, FG-60F, FGR-60F-3G4G, FG-61F, FG-80F, FG-80FB, FG-80FP, FG-81F, and FG-81FP |
24 |
| FortiGate 100D, FortiGate-VM02 | 24 |
| FortiGate 100E, 100EF, 100F, 101E, 140E, 140E-POE | 32 |
| FortiGate 200E, 201E | 64 |
| FortiGate 300D to 500D | 48 |
| FortiGate 300E to 500E | 72 |
| FortiGate 600D to 900D and FortiGate-VM04 | 64 |
| FortiGate 600E to 900E | 96 |
| FortiGate 1000D to 15xxD | 128 |
| FortiGate 1100E to 26xxF | 196 |
|
FortiGate-3xxx and up and FortiGate-VM08 and up |
300 |
|
New models (NPI releases) might not support FortiLink. Contact Customer Service & Support to check support for FortiLink. |
What’s new in FortiOS 7.2.6
The following list contains new managed FortiSwitch features added in FortiOS 7.2.6:
-
A new CLI command allows FortiOS to accept FortiSwitchOS VLAN descriptions with a maximum length of 64 characters. Before FortiOS 7.2.6, the maximum length was 15 characters. The RADIUS server uses the Tunnel-Private-Group-ID attribute for dynamic VLAN assignment.