Configuring ports using the GUI

You can use the WiFi & Switch Controller > FortiSwitch Ports page to do the following with FortiSwitch switch ports:

• Set the native VLAN and add more VLANs
• Edit the description of the port
• Enable or disable the port
• Set the access mode of the port:
  • Static—The port does not use a dynamic port policy or FortiSwitch network access control (NAC) policy.
  • Assign Port Policy—The port uses a dynamic port policy.
  • NAC—The port uses a FortiSwitch NAC policy.
• Enable or disable PoE for the port
• Enable or disable DHCP snooping (if supported by the port)
• Enable or disable whether a port is an edge port
• Enable or disable STP (if supported by the port)
• Enable or disable loop guard (if supported by the port)
• Enable or disable STP BPDU guard (if supported by the port)
• Enable or disable STP root guard (if supported by the port)