Generic UPS
What is Discovered and Monitored
|
Protocol |
Information Discovered |
Metrics collected |
Used for |
|---|---|---|---|
|
SNMP (V1, V2c) |
Host name, Hardware model, Network interfaces |
UPS metrics: Remaining battery charge, Battery status, Time on battery, Estimated Seconds Remaining, Output voltage, Output current, Temperature |
Availability and Performance Monitoring |
Configuration
SNMP
Note: UPS-MIB Required
Your device must have a UPS-MIB database to communicate with FortiSIEM over SNMP.
FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in "Discovery Settings" and "Setting Credentials" in the User Guide, to establish the connection between the device and FortiSIEM, and to initiate the device discovery process.
Setting Access Credentials
SNMP Access Credentials for All Devices
Use these Access Method Definition settings to allow FortiSIEM to access your device over SNMP. Set the Name and Community String.
| Setting | Value |
|---|---|
| Name | <set name> |
| Device Type | Generic |
| Access Protocol | SNMP |
| Community String | <your own> |