System Information
The System Information widget displays information about FortiSandbox and enables you to configure basic system settings.
|
Firmware Version |
The version and build number of the firmware installed on the FortiSandbox unit. When new firmware is available, a blinking New firmware available link appears. Clicking the link redirects you to a page where you can download and install available firmware, or manually upload firmware. You can also choose to create backup configurations. |
|
Hostname |
The name assigned to this FortiSandbox unit. Click Change to edit the FortiSandbox host name. |
|
Serial Number |
The serial number of this FortiSandbox unit. The serial number is unique to the FortiSandbox unit and does not change with firmware upgrades. The serial number is used for identification when connecting to the FortiGuard server. |
|
System Configuration |
The date and time of the last system configuration backup. Click Backup/Restore to go to the System Recovery page. |
|
System Time |
The current time on the FortiSandbox internal clock or NTP server. Select Change to configure the system time. |
|
Unit Type |
The HA cluster status of the device: Standalone, Primary, Secondary, or Worker. In an HA-Cluster, click Change to change the cluster status of the device. If the rating engine is not available or out-of-date, a red blinking No Rating Engine message appears. |
|
Uptime |
The duration of time that the FortiSandbox unit has been running since boot up. |
|
Username |
The administrator that is currently logged in. |