Diagnose Commands
The following diagnostic commands are available:
|
Command |
Description |
|---|---|
|
hardware-info |
Display general hardware status information. Use this option to view CPU, memory, disk, and RAID information, as well as system time settings. |
|
diagnose-debug |
Display detailed debug logs of network share scan and communications with devices. See diagnose-debug for details. |
|
diag-sys-top |
Display system top information. See diagnose-sys-top for details. |
|
diagnose-sys-perf |
Display system performance information. Optionally, specify how many previous hours to show with |
|
disk-attributes |
Display system disk attributes. This option is only available on hardware models. |
|
disk-errors |
Display any system disk errors. This option is only available on hardware models. |
|
disk-health |
Display disk health information. This option is only available on hardware models. |
|
disk-info |
Display disk hardware status information. This option is only available on hardware models. |
|
raid-hwinfo |
Display RAID hardware status information. This option is only available on hardware models. |
|
test-network |
Test the network connection. The output can be used to detect network speed and connection to FDN servers and Microsoft servers. |