Fortinet black logo

FortiSandbox VM on Azure

Home FortiSandbox Public Cloud 3.0.0 FortiSandbox VM on Azure
3.0.0
4.4.0
4.2.1
4.2.0
4.0.0
3.2.0
3.1.0
3.0.0

Creating virtual networks

Creating virtual networks

To create virtual networks in Azure:
  1. In the Azure portal, select Virtual Networks from the left navigation pane.
  2. Select Add to create a new virtual network.

    Create a new virtual network

  3. Enter the following information:
    Name Enter a name for the virtual network.
    Address Space Use an Azure suggested unused class B network (xxx.xxx.0.0/16) or enter your preferred unused class B network.
    Subscription Select your subscription type.
    Resource group Select the resource group you created in the Creating a resource group step.
    Location Select the same location used while setting up the resource group.
    Subnet
    • Name
    		 Enter a name for the FSA port1 (the management subnet).
    • Address Range

    Enter a class C network (xxx.xxx.x.0/24) within the virtual network.

    DDoS protection

    Basic.

    Service endpoints

    Disabled.
  4. Select Create.
  5. Create one additional subnet in the virtual network:
    • Enter the subnet name for FSA port2 (the custom VM subnet), and assign another class C network (xxx.xxx.xxx.0/24) in that network.
Note

The use of class B (xxx.xxx.0.0/16) and class C (xxx.xxx.0.24) in the table above is an example of a common use case. You can adjust the network range as per your own needs.
Previous
Next

Creating virtual networks

To create virtual networks in Azure:
  1. In the Azure portal, select Virtual Networks from the left navigation pane.
  2. Select Add to create a new virtual network.

    Create a new virtual network

  3. Enter the following information:
    Name Enter a name for the virtual network.
    Address Space Use an Azure suggested unused class B network (xxx.xxx.0.0/16) or enter your preferred unused class B network.
    Subscription Select your subscription type.
    Resource group Select the resource group you created in the Creating a resource group step.
    Location Select the same location used while setting up the resource group.
    Subnet
    • Name
    		 Enter a name for the FSA port1 (the management subnet).
    • Address Range

    Enter a class C network (xxx.xxx.x.0/24) within the virtual network.

    DDoS protection

    Basic.

    Service endpoints

    Disabled.
  4. Select Create.
  5. Create one additional subnet in the virtual network:
    • Enter the subnet name for FSA port2 (the custom VM subnet), and assign another class C network (xxx.xxx.xxx.0/24) in that network.
Note

The use of class B (xxx.xxx.0.0/16) and class C (xxx.xxx.0.24) in the table above is an example of a common use case. You can adjust the network range as per your own needs.
Previous
Next