Adding an ACS system
To integrate FortiRecorder with an access control system (ACS), specify the ACS connection, login credentials, and event actions.
To add an ACS system
- Go to ACS > Configuration > ACS.
-
Configure the following settings:
Setting Name
Description
Status
Enable to use this ACS server.
Type
Currently only Kantech EntraPass is supported.
User Name
Enter the ACS user name.
Password
Enter the password of the ACS user name.
Address
Enter the IP address of the ACS server.
Port
Enter the listening port number of the ACS server.
Secure
Enable if the ACS server requires secure connections (HTTPS).
Actions
For each ACS event type (Door open, etc.), select the action that it triggers on FortiRecorder:
- no action
- event: Add a marker on the timeline on FortiRecorder.
- event clip: Record a short video clip only. See also Associating cameras with ACS elements.