Create or edit a reverse cache server

To create a reverse cache server:

1. Go to Web Cache > Reverse Cache Server and select Create New from the toolbar. The Create Reverse Cache Server window opens.

   

2. Configure the following settings:

   Name	Enter a name for the reverse cache server.
   IP	Enter the IP address of the reverse cache server.
   Port	Enter the port number that the reverse cache server will use.
   Status	Enable or disable the reverse cache server.
   Priority	Enter a number to indicate the priority of the reverse cache server.
   Prefetch File	If you created a prefetch file of URLs that you want preloaded, select + to open the Select Entries window and then select the prefetch file. To create a prefetch file, see Prefetch URLs.

3. Click OK to create the reverse cache server.

To edit a reverse cache server:

1. Go to Web Cache > Reverse Cache Server.

2. Select the server you want to edit and then click Edit from the toolbar or double-click on the server in the table. The Edit Reverse Cache Server window opens.

3. Edit the information as required and then click OK to apply your changes.