AliCloud Function action

AliCloud functions can be called when an automation stitch is triggered. This example uses a Security Rating Summary trigger in the automation stitch.

To configure an AliCloud function automation stitch in the GUI:

1. Go to Security Fabric > Automation and click Create New.

2. Enter the stitch name.

3. Configure the trigger:

   1. Click Add Trigger.

   2. Click Create and select Security Rating Summary.

   3. Enter the following:

      Name	auto-ali
      Report	Security Posture

   4. Click OK.

   5. Select the trigger in the list and click Apply.

4. Configure the AliCloud Function action:

   1. Click Add Action.

   2. Click Create and select AliCloud Function.

   3. Enter the following:

      Name	Ali-Action-1
      URL	Enter the request API URI
      Authorization	Function
      AccessKey ID	Enter the access key ID
      AccessKey Secret	Enter the access key secret

   4. Click OK.

   5. Select the action in the list and click Apply.

5. Click OK.

To configure an AliCloud function automation stitch in the CLI:

1. Create an automation trigger:

   config system automation-trigger
       edit "auto-ali"
           set event-type security-rating-summary
       next
   end

2. Create an automation action:

   config system automation-action
       edit "Ali-Action-1"
           set action-type alicloud-function
           set alicloud-function-authorization function
           set alicloud-access-key-id "XXXXXxXXXXxxxxxx"
           set alicloud-access-key-secret xxxxxx
           set uri "0000000000000000.us-east-1.fc.aliyuncs.com/2099-99-99/proxy/test-function/echoBodyAuth/"
       next
   end

3. Create the automation stitch:

   config system automation-stitch
       edit "auto-ali"
           set trigger "auto-ali"
           config actions
               edit 1
                   set action "Ali-Action-1"
                   set required enable
               next
           end
       next
   end

When the automation stitch is triggered, the Security Fabric > Automation page shows the stitch trigger time. In AliCloud, the function log shows that the function was called, executed, and finished.