config firewall sniffer
Configure sniffer.
config firewall sniffer
Description: Configure sniffer.
edit <id>
set status [enable|disable]
set logtraffic [all|utm|...]
set non-ip [enable|disable]
set interface {string}
set host {string}
set port {string}
set protocol {string}
set vlan {string}
set max-packet-count {integer}
next
end
config firewall sniffer
|
Parameter |
Description |
Type |
Size |
Default |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
id |
Sniffer ID. |
integer |
Minimum value: 0 Maximum value: 9999 |
0 |
||||||||
|
status |
Enable/disable the active status of the sniffer. |
option |
- |
enable |
||||||||
|
|
|
|||||||||||
|
logtraffic |
Either log all sessions, only sessions that have a security profile applied, or disable all logging for this policy. |
option |
- |
utm |
||||||||
|
|
|
|||||||||||
|
non-ip |
Enable/disable sniffing non-IP packets. |
option |
- |
disable |
||||||||
|
|
|
|||||||||||
|
interface |
Interface name that traffic sniffing will take place on. |
string |
Maximum length: 35 |
|
||||||||
|
host |
Hosts to filter for in sniffer traffic. |
string |
Maximum length: 63 |
|
||||||||
|
port |
Ports to sniff. |
string |
Maximum length: 63 |
|
||||||||
|
protocol |
Integer value for the protocol type as defined by IANA. |
string |
Maximum length: 63 |
|
||||||||
|
vlan |
List of VLANs to sniff. |
string |
Maximum length: 63 |
|
||||||||
|
max-packet-count |
Maximum packet count. |
integer |
Minimum value: 1 Maximum value: 1000000 |
4000 |
||||||||