config router static
Configure IPv4 static routing tables.
config router static Description: Configure IPv4 static routing tables. edit <seq-num> set status [enable|disable] set dst {ipv4-classnet} set src {ipv4-classnet} set gateway {ipv4-address} set weight {integer} set priority {integer} set device {string} set comment {var-string} set blackhole [enable|disable] set sdwan-zone <name1>, <name2>, ... set dstaddr {string} set link-monitor-exempt [enable|disable] next end
config router static
Parameter |
Description |
Type |
Size |
Default |
||||||
---|---|---|---|---|---|---|---|---|---|---|
seq-num |
Sequence number. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||
status |
Enable/disable this static route. |
option |
- |
enable |
||||||
|
|
|||||||||
dst |
Destination IP and mask for this route. |
ipv4-classnet |
Not Specified |
0.0.0.0 0.0.0.0 |
||||||
src |
Source prefix for this route. |
ipv4-classnet |
Not Specified |
0.0.0.0 0.0.0.0 |
||||||
gateway |
Gateway IP for this route. |
ipv4-address |
Not Specified |
0.0.0.0 |
||||||
weight |
Administrative weight. |
integer |
Minimum value: 0 Maximum value: 255 |
0 |
||||||
priority |
Administrative priority. |
integer |
Minimum value: 1 Maximum value: 65535 |
1 |
||||||
device |
Gateway out interface or tunnel. |
string |
Maximum length: 35 |
|
||||||
comment |
Optional comments. |
var-string |
Maximum length: 255 |
|
||||||
blackhole |
Enable/disable black hole. |
option |
- |
disable |
||||||
|
|
|||||||||
sdwan-zone |
Choose SD-WAN Zone. SD-WAN zone name. |
string |
Maximum length: 79 |
|
||||||
dstaddr |
Name of firewall address or address group. |
string |
Maximum length: 79 |
|
||||||
link-monitor-exempt |
Enable/disable withdrawal of this static route when link monitor or health check is down. |
option |
- |
disable |
||||||
|
|