config system ptp
Configure system PTP information.
config system ptp
Description: Configure system PTP information.
set status [enable|disable]
set mode [multicast|hybrid]
set delay-mechanism [E2E|P2P]
set request-interval {integer}
set interface {string}
set server-mode [enable|disable]
config server-interface
Description: FortiGate interface(s) with PTP server mode enabled. Devices on your network can contact these interfaces for PTP services.
edit <id>
set server-interface-name {string}
set delay-mechanism [E2E|P2P]
next
end
end
config system ptp
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
status |
Enable/disable setting the FortiProxy system time by synchronizing with an PTP Server. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
mode |
Multicast transmission or hybrid transmission. |
option |
- |
multicast |
||||||
|
|
|
|||||||||
|
delay-mechanism |
End to end delay detection or peer to peer delay detection. |
option |
- |
E2E |
||||||
|
|
|
|||||||||
|
request-interval |
The delay request value is the logarithmic mean interval in seconds between the delay request messages sent by the slave to the master. |
integer |
Minimum value: 1 Maximum value: 6 |
1 |
||||||
|
interface |
PTP client will reply through this interface. |
string |
Maximum length: 15 |
|
||||||
|
server-mode |
Enable/disable FortiGate PTP server mode. Your FortiGate becomes an PTP server for other devices on your network. |
option |
- |
disable |
||||||
|
|
|
|||||||||
config server-interface
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
id |
ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||
|
server-interface-name |
Interface name. |
string |
Maximum length: 15 |
|
||||||
|
delay-mechanism |
End to end delay detection or peer to peer delay detection. |
option |
- |
E2E |
||||||
|
|
|
|||||||||