config router policy
Configure IPv4 routing policies.
config router policy
Description: Configure IPv4 routing policies.
edit <seq-num>
set input-device <name1>, <name2>, ...
set src <subnet1>, <subnet2>, ...
set dst <subnet1>, <subnet2>, ...
set action [deny|permit]
set protocol {integer}
set start-port {integer}
set end-port {integer}
set start-source-port {integer}
set end-source-port {integer}
set gateway {ipv4-address}
set output-device {string}
set status [enable|disable]
set comments {var-string}
next
end
config router policy
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
seq-num |
Sequence number. |
integer |
Minimum value: 1 Maximum value: 65535 |
0 |
||||||
|
input-device |
Incoming interface name. Interface name. |
string |
Maximum length: 79 |
|
||||||
|
src |
Source IP and mask (x.x.x.x/x). IP and mask. |
string |
Maximum length: 79 |
|
||||||
|
dst |
Destination IP and mask (x.x.x.x/x). IP and mask. |
string |
Maximum length: 79 |
|
||||||
|
action |
Action of the policy route. |
option |
- |
permit |
||||||
|
|
|
|||||||||
|
protocol |
Protocol number. |
integer |
Minimum value: 0 Maximum value: 255 |
0 |
||||||
|
start-port |
Start destination port number. |
integer |
Minimum value: 0 Maximum value: 65535 |
1 |
||||||
|
end-port |
End destination port number. |
integer |
Minimum value: 0 Maximum value: 65535 |
65534 |
||||||
|
start-source-port |
Start source port number. |
integer |
Minimum value: 0 Maximum value: 65535 |
1 |
||||||
|
end-source-port |
End source port number. |
integer |
Minimum value: 0 Maximum value: 65535 |
65534 |
||||||
|
gateway |
IP address of the gateway. |
ipv4-address |
Not Specified |
0.0.0.0 |
||||||
|
output-device |
Outgoing interface name. |
string |
Maximum length: 35 |
|
||||||
|
status |
Enable/disable this policy route. |
option |
- |
enable |
||||||
|
|
|
|||||||||
|
comments |
Optional comments. |
var-string |
Maximum length: 255 |
|
||||||