config system ntp

Configure system NTP information.

config system ntp
    Description: Configure system NTP information.
    set ntpsync [enable|disable]
    set type [fortiguard|custom]
    set syncinterval {integer}
    config ntpserver
        Description: Configure the FortiProxy to connect to any available third-party NTP server.
        edit <id>
            set server {string}
            set ntpv3 [enable|disable]
            set authentication [enable|disable]
            set key {password}
            set key-id {integer}
        next
    end
    set source-ip {ipv4-address}
    set server-mode [enable|disable]
    config interface
        Description: FortiProxy interface(s) with NTP server mode enabled. Devices on your network can contact these interfaces for NTP services.
        edit <interface-name>
        next
    end
end

config system ntp

Parameter	Description	Type	Size
ntpsync	Enable/disable setting the FortiProxy system time by synchronizing with an NTP Server.	option	-
	Option Description enable Enable synchronization with NTP Server. disable Disable synchronization with NTP Server.
type	Use the FortiGuard NTP server or any other available NTP Server.	option	-
	Option Description fortiguard Use the FortiGuard NTP server. custom Use any other available NTP server.
syncinterval	NTP synchronization interval.	integer	Minimum value: 1 Maximum value: 1440
source-ip	Source IP for communications to the NTP server.	ipv4-address	Not Specified
server-mode	Enable/disable FortiProxy NTP Server Mode. Your FortiProxy becomes an NTP server for other devices on your network. The FortiProxy relays NTP requests to its configured NTP server.	option	-
	Option Description enable Enable FortiProxy NTP Server Mode. disable Disable FortiProxy NTP Server Mode.

config ntpserver

Parameter	Description	Type	Size
id	NTP server ID.	integer	Minimum value: 0 Maximum value: 4294967295
server	IP address or hostname of the NTP Server.	string	Maximum length: 63
ntpv3	Enable to use NTPv3 instead of NTPv4.	option	-
	Option Description enable Enable NTPv3. disable Disable NTPv3 (use NTPv4).
authentication	Enable/disable MD5 authentication.	option	-
	Option Description enable Enable MD5 authentication. disable Disable MD5 authentication.
key	Key for MD5 authentication.	password	Not Specified
key-id	Key ID for authentication.	integer	Minimum value: 0 Maximum value: 4294967295

config interface

Parameter	Description	Type	Size
interface-name	Interface name.	string	Maximum length: 64