Configuring an LDAP server

To configure an LDAP server:

1. Go to Security > Firewall Objects.

2. Select LDAP Servers from the User & Device dropdown.

3. Click Create or select an existing server from the list and click Edit.

4. In the form, enter the following information:

   Settings	Guidelines
   Name	Enter the display name for this server.
   Server IP/Name	Enter the server IP address or FQDN.
   Server Port	Enter the connection port on the server.
   Common Name Identifier	Enter the value of the Common Name attribute from the LDAP server.
   Distinguished Name	Enter the Distinguished Name value from the LDAP server.
   Exchange Server	Specify whether the LDAP server is connected to an Exchange server.
   Bind Type	Select from the following: Simple: The Distinguished Name and Password are used to authenticate with the LDAP server. Anonymous: The LDAP server allows the client to search the directory without logging in. Regular: The Distinguished Name and Password are used to authenticate with the LDAP server.
   User DN	Enter the distinguished name used to identify the LDAP user.
   Change Password	Enable to change the saved connection password for this LDAP server.
   Password	Enter the connection password for this LDAP server.
   Secure Connection	Select the connection mode for LDAP queries from the following options: None: Do not use a secure connection mode. Secure STARTTLS: Connect using StartTLS. Secure LDAPS: Use LDAP over SSL when connecting.

5. Click Save.