Configuration

View or edit the configuration for each managed WAN extender device.

The following actions are available:

• Edit an extender.

• Add or edit an extender profile.

• Add or edit an extender data plan.

To edit an extender:

1. In WAN> Configuration > Managed Extenders, select an item from the list and click Edit .
2. In the form, update the following information:

3. Field	Required	Description
   Serial number		Displays the device serial number. This field is read-only.
   Mode		Displays the extender mode. This field is read-only.
   Profile		Displays the extender profile. This field is read-only. To use a custom profile for this extender, contact your system administrator.
   Status	Y	Specify the authorization status. Select from the following options: Deauthorize Authorize
   Override Management Access	N	Enable or disable overriding management access permission, then select the access to allow.
   Override Login Password	N	Enable or disable login password override, then specify the password.
   Modem n Interface	Y	Select the interface for this modem.

4. Click Save.

To add or edit an extender profile:

1. In WAN> Configuration > Profiles:

   • Click Create New to add a new extender profile.

   • Select an item from the list and click Edit to edit an existing extender profile.

2. In the form, enter or update the following information:

3. Field	Required	Description
   Name	Y	Enter a name for the profile.
   Model	Y	Select the extender model.
   Mode	Y	Select from the following: WAN Extension LAN Extension
   Data plan	Y	Select a data plan.
   Management Access	N	Select the management access permission to allow.
   Login Password	N	Specify the password.
   Link load balance	N	Select the load balance mode from the following: Active backup Load balance This option is only available when Mode is set to LAN Extension.
   IPsec Interface	Y	Select the IPsec interface. This option is only available when Mode is set to LAN Extension.
   IPsec Interface IP/FQDN	N	Enter the public IP address or FQDN of the IPsec interface. This option is only available when Mode is set to LAN Extension.
   Uplink Port	N	Select an upllink port from the list of click Create to add a new uplink port. See To add or edit an uplink port. This option is only available when Mode is set to LAN Extension.
   Modem n	N	The number of modems varies by selected model.
   Default SIM	N	Select the SIM to use for this modem. If Carrier is selected, enter the Preferred carrier.
   SIM 1 PIN	N	Enable disable a PIN for SIM 1, then enter a PIN.
   SIM 1 PIN	N	Enable disable a PIN for SIM 1, then enter a PIN.
   GPS	N	Enable or disable GPS.
   Auto SIM Switch	N	Select when SIMs should be switched.
   By disconnecting	N	Enable or disable switching by disconnecting, then enter the Disconnect threshold and Disconnect checking period.
   By signal	N	Enable or disable switching by signal.
   By data plan	N	Enable or disable switching by data plan.
   Controller Report	N	Enable or disable the controller report, then enter the Interval and Signal Threshold for reporting.

4. Click Save.

   The extender profile is created and added to the list.

To add or edit an uplink port:

1. In the WAN extender profile form, in Uplink Port:
   • Click Create New to add a new uplink port.
   • Select an item from the list and click Edit to edit an existing uplink port.
2. In the form, enter or update the following information:

3. Field	Required	Description
   Name	Y	Enter a name for the port.
   Uplink port	Y	Select the port from the list.
   Role	Y	Select the role.

4. Click Save.

   The uplink port is created and added to the list.

To add or edit a WAN extender data plan:

1. In WAN > Configuration > Data Plans, select a Site and Device then do one of the following:

   • Click Create to add a new data plan.
   • Select an item from the list and click Edit to edit an existing extender.

2. In the form, enter or update the following information:

   Field	Required	Description
   Name	Y	Enter a name for the data plan.
   Available on	Y	Select a device modem or All Modems.
   Type	Y	Select the way for the model to select the SIM card from the following options: Carrier: Assign by SIM carrier. SIM Slot: Assign to SIM slot 1 or 2 ICCID: Assign to a specific SIM by its serial number (18 to 22 digits). Generic: Compatible with any SIM, Assigned if no other data plan matches the chosen SIM.
   Carrier	Y	Enter the SIM carrier. Note: This field is only available when Type is Carrier.
   ICCID	Y	Enter the serial number of the SIM. Note: This field is only available when Type is ICCID.
   Authentication	Y	Select the connection authentication protocol from the following: None PAP CHAP
   Username	Y	Enter the username to use for authentication. Note: This field is only available when Authentication is PAP or CHAP.
   Password	Y	Enter the password to use for authentication. Note: This field is only available when Authentication is PAP or CHAP.
   PDN type	Y	Select the packet data network (PDN) IP address family.
   Preferred subnet	Y	Enter the preferred DHCP subnet to use for connections.
   APN	N	Enter the access point name (APN) of the SIM card.
   Private network	N	Enable or disable blocking all non-NATed traffic.
   Monthly data limit	Y	Specify, in MB, the monthly data limit for this plan.
   Monthly cost	Y	Specify the monthly cost.
   Billing reset day	Y	Enter the day of the month when billing resets.
   Overage	N	Enable or disable allowing data overage.
   Signal Threshold	N	Specify the signal-strength threshold beyond which SIM switch will occur.
   Signal Period	Y	Enter the length of time (from 600 to 18000 seconds) for SIM switch to occur when signal strength remains below the set signal threshold for more than half of the set period.

3. Click Save.

   The data plan is saved.