Route
The Route dropdown on the Security > Network tab displays a list of static routes.
Configuring static routes
Adding a new static route
- Select Static Route from the Route dropdown.
- Select Create to create a new static route.
- Enter values in the relevant fields. See Static route fields.
- Select Save.
Updating a static route
- Select Static Route from the Route dropdown.
- Select a static route and then select Edit.
- Update the values that have changed.
- Select Save.
Deleting a static route
- Select Static Route from the Route dropdown.
- Select a static route and then select Delete.
Static route fields
The Create Static Router and Edit Static Router dialog contain the following fields:
Settings |
Guidelines |
---|---|
Destination
|
Required. Select Subnet or Named Address for the destination type.
|
Gateway |
Required. Enter an IPv4 address for the next hop. Note: This options is not available when SD-WAN Interface is enabled. |
SDWAN Interface |
Enable SD-WAN interface. |
SDWAN Zones |
From the dropdown, select an SD-WAN zone. Note: This options is available when SD-WAN Interface is enabled. |
Interface |
Required. Select the network interface that connects to the gateway from the dropdown. Note: This options is not available when SD-WAN Interface is enabled. |
Distance |
Required. Enter the distance. The default is 10. The maximum is 255. |
Priority |
Required. Enter the priority. The default is 0. The maximum is 4294967295. Note: This options is not available when SD-WAN Interface is enabled. |
Comments |
Optional. Enter a description of the static route. The value is a string with a maximum of 255 characters. |
Status |
Enable or disable the static route. |