Fortinet black logo

Administration Guide

Home FortiPortal 7.2.0 Administration Guide
7.2.0
7.2.4
7.2.3
7.2.2
7.2.1
7.2.0
7.0.8
7.0.7
7.0.6
7.0.5
7.0.4
7.0.3
7.0.2
7.0.1
7.0.0
6.0.15
6.0.14
6.0.13
6.0.12
6.0.11
6.0.10
6.0.9
6.0.8
6.0.7
6.0.6
6.0.5
6.0.4
6.0.3
6.0.2
6.0.1
6.0.0
5.3.8
5.3.7
5.3.6
5.3.5
5.3.4
5.3.3
5.3.2
5.3.0
5.2.0
4.1.0
4.0.3
4.0.2
4.0.1
4.0.0

Disclaimers

Disclaimers

FortiPortal allows you to set up pre-login and post-login disclaimers.

A text area on the landing page presents a pre-login disclaimer to anyone attempting to log in. The following figure shows the pre-login disclaimer text area:

Once you are successfully authenticated, a post-login disclaimer banner appears only when the login attempt was made by a user. The user must click Accept to access FortiPortal. If the customer clicks Reject, they are logged out immediately.

When an administrative user attempts to log in, they only get the pre-login disclaimer.

Post-login disclaimer appears only when a user attempts to log in to FortiPortal.

When a user logs in for the first time, a Change Password dialog appears asking the user to change the password.
To set up disclaimers:
  1. Go to System > Theme.
  2. In the Disclaimers pane, select Pre Login Disclaimer and/or Post Log in Disclaimer checkboxes, and enter the disclaimer content.

    Both pre-login and post-login disclaimers are selected here.

  3. Click Save to save the changes.

    4. At the next instance of login, and depending on whether you are an administrative user or a user, relevant disclaimers appear.

Previous
Next

Disclaimers

FortiPortal allows you to set up pre-login and post-login disclaimers.

A text area on the landing page presents a pre-login disclaimer to anyone attempting to log in. The following figure shows the pre-login disclaimer text area:

Once you are successfully authenticated, a post-login disclaimer banner appears only when the login attempt was made by a user. The user must click Accept to access FortiPortal. If the customer clicks Reject, they are logged out immediately.

When an administrative user attempts to log in, they only get the pre-login disclaimer.

Post-login disclaimer appears only when a user attempts to log in to FortiPortal.

When a user logs in for the first time, a Change Password dialog appears asking the user to change the password.
To set up disclaimers:
  1. Go to System > Theme.
  2. In the Disclaimers pane, select Pre Login Disclaimer and/or Post Log in Disclaimer checkboxes, and enter the disclaimer content.

    Both pre-login and post-login disclaimers are selected here.

  3. Click Save to save the changes.

    4. At the next instance of login, and depending on whether you are an administrative user or a user, relevant disclaimers appear.

Previous
Next