Configuring a service
To configure a service:
- Go to Security > Firewall Objects.
- Select Service in the firewall object type dropdown.
- Click Create or select an existing service from the list and click Edit.
- In the form, enter the following information:
Settings
Guidelines
Name
Enter a name for the service.
Comments
Enter comments about the service.
Color
Required. From the dropdown, select a color.
Show in Service list
Enable to display the service in the service list.
Note: This option is enabled by default.
Category
From the dropdown, select a category from the following options:
Uncategorized (default)
Authentication
Email
File Access
General
Network Services
Remote Access
Tunneling
VoIP, Messaging, & Other Application
Web Access
Web Proxy
Protocol Type
Select a protocol type:
- TCP/UDP/SCTP—address and destination port range (default).
- ICMP—type and code
- IP—IP protocol number
Address
Select either IP Range or FQDN and then enter the IP address range or the FQDN.
Note: This option is only available when the Protocol Type is TCP/UDP/SCTP.
Destination Port
From the dropdown, select TCP, UDP, or SCTP protocol type and enter a port range.
Select + to add multiple destination ports and ranges.
Select the Delete (
) icon to remove a destination port.Note: This option is only available when the Protocol Type is TCP/UDP/SCTP.
Type
Enter the type number.
Note: This option is only available when the Protocol Type is ICMP.
Code
Enter the code number.
Note: This option is only available when the Protocol Type is ICMP.
Protocol Number
Enter the protocol number.
Note: This option is only available when the Protocol Type is IP.
- Click Save.