Upgrading from 7.0.1 to 7.0.2

You can upgrade from FortiPortal 7.0.1 to 7.0.2.

Due to fundamental system changes, a direct upgrade from FortiPortal 7.0.1 to 7.0.2 is not possible. Follow the upgrade procedure below to upgrade from 7.0.1 to 7.0.2.

See Upgrading from 6.0.12 or 6.0.13 to 7.0.2 or 7.0.3 for information about upgrading FortiPortal 6.0.12 or 6.0.13 to 7.0.2 or 7.0.3.

To upgrade FortiPortal to 7.0.2:

1. Save a backup of your existing FortiPortal 7.0.1 system:

   1. Go to Dashboard.
   2. In the System Information pane, select the System Backup icon in System Configuration to save a backup file onto the local computer.

   For a scalable cluster, back up the primary node.

2. Shut down your FortiPortal 7.0.1 VM.

3. Download and deploy the FPC_VM64-V7.0.1-build8000-release-Portal.ova image. This image is available to download from the Fortinet Customer Service & Support website (https://support.fortinet.com/).

4. In this instance, go to Dashboard > System Configuration, click Restore System, and upload the backup file you saved previously. The system reboots when the restore process is complete.

5. In the System Information pane, in Version, click the Upload Firmware icon, click Choose File and locate the firmware image for FortiPortal 7.0.2 on your local computer.

6. Click Upload

   Uploading a firmware image requires sufficient network bandwidth. When upgrading a scalable cluster, the upgrade may take 10-20 minutes, or longer, depending on server performance.

   The firmware image uploads from your local computer to the FortiPortal, which will then reboot.

   The license may display N/A but it will become valid after about 90 minutes.

To upgrade the secondary nodes of a scalable cluster:

1. Shutdown the secondary nodes.

2. Download and deploy two or more new FortiPortal 7.0.2 instances.

3. Join these new instances to the primary node in the scalable cluster.