DHCP Server

DHCP Server

You can add, update, and delete DHCP servers.

Adding a DHCP server

Select DHCP Server from the System dropdown.
Select Create to create a new DHCP server.
Enter values in the relevant fields. See DHCP server fields.
Select Save.

Updating a DHCP server

Select DHCP Server from the System dropdown.
Select a DHCP server and then select Edit.
Update the values that you want to change.
Select Save.

Deleting a DHCP server

Select DHCP Server from the System dropdown.
Select a DHCP server and then select Delete.
Select Yes in the confirmation dialog box to delete the selected DHCP server.

DHCP server fields

The Create DHCP Server and Edit DHCP Server dialogs contain the following fields:

Settings	Guidelines
Interface	From the dropdown, select an interface.
DHCP status	Enable/disable DHCP status. Note: By default, the DHCP status is enabled.
IP Range	DHCP IP address range. The IP range of each DHCP server must match the network address range. See Configure an IP range.
Netmask	Netmask assigned by the DHCP server.
Default Gateway	Select either Same as Interface IP (default) or Specify. When Specify selected, enter the default gateway IP address assigned by the DHCP server.
DNS server	Options for assigning DNS servers to DHCP clients: Same as System DNS—Clients are assigned the configured DNS servers of the firewall. Same as Interface IP —The IP address of the interface the DHCP server is added to becomes the clientʼs DNS server IP address. Specify—Specify up to four DNS servers in the DHCP server configuration (default).
DNS Server1	DNS server 1. Note: This option is only available when the DNS server is Specify.
DNS Server2	DNS server 2. Note: This option is only available when the DNS server is Specify.
DNS Server3	DNS server 3. Note: This option is only available when the DNS server is Specify.
DNS Server4	DNS server 3. Note: This option is only available when the DNS server is Specify.
Lease time	Set the time after which the assigned IP address expires, in seconds. The default is 604800.

Configure an IP range

In IP Range, select + to add a new IP address range.
In the IP Range field, enter the IP range.

DHCP Server

You can add, update, and delete DHCP servers.

Adding a DHCP server

Select DHCP Server from the System dropdown.
Select Create to create a new DHCP server.
Enter values in the relevant fields. See DHCP server fields.
Select Save.

Updating a DHCP server

Select DHCP Server from the System dropdown.
Select a DHCP server and then select Edit.
Update the values that you want to change.
Select Save.

Deleting a DHCP server

Select DHCP Server from the System dropdown.
Select a DHCP server and then select Delete.
Select Yes in the confirmation dialog box to delete the selected DHCP server.

DHCP server fields

The Create DHCP Server and Edit DHCP Server dialogs contain the following fields:

Settings	Guidelines
Interface	From the dropdown, select an interface.
DHCP status	Enable/disable DHCP status. Note: By default, the DHCP status is enabled.
IP Range	DHCP IP address range. The IP range of each DHCP server must match the network address range. See Configure an IP range.
Netmask	Netmask assigned by the DHCP server.
Default Gateway	Select either Same as Interface IP (default) or Specify. When Specify selected, enter the default gateway IP address assigned by the DHCP server.
DNS server	Options for assigning DNS servers to DHCP clients: Same as System DNS—Clients are assigned the configured DNS servers of the firewall. Same as Interface IP —The IP address of the interface the DHCP server is added to becomes the clientʼs DNS server IP address. Specify—Specify up to four DNS servers in the DHCP server configuration (default).
DNS Server1	DNS server 1. Note: This option is only available when the DNS server is Specify.
DNS Server2	DNS server 2. Note: This option is only available when the DNS server is Specify.
DNS Server3	DNS server 3. Note: This option is only available when the DNS server is Specify.
DNS Server4	DNS server 3. Note: This option is only available when the DNS server is Specify.
Lease time	Set the time after which the assigned IP address expires, in seconds. The default is 604800.

Configure an IP range

In IP Range, select + to add a new IP address range.
In the IP Range field, enter the IP range.

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

User Guide

DHCP Server

Adding a DHCP server

Updating a DHCP server

Deleting a DHCP server

DHCP server fields

Configure an IP range

DHCP Server

DHCP Server

Adding a DHCP server

Updating a DHCP server

Deleting a DHCP server

DHCP server fields