Check HA status
After HA is enabled, the HA status needs to be checked on both the Primary and Secondary units. Once HA has been configured, the effective operating mode is typically the same as the configured mode. However, the effective operating mode may diverge from the configured mode after HA failover is triggered.
HA Configured Mode |
Displays the HA mode that you configured
|
HA Effective Mode |
Displays the current operating mode
|
To check HA status with the CLI:
get system status
To check the HA status with the GUI:
- Go to Dashboard > System Status > Network.
- In the System Information widget, go to HA Status.