config system ICAP server
Use this command to configure ICAP server settings.
Syntax
config system icap server set conf-level <confidence_level_int> set interface {port1 | port2} set enable {1 | 0} set rtavscan {1 | 0} set ssl-port <ssl_port_int> set ssl-support {1 | 0} set port <port_int> set timeout <timeout_int> end
Variable |
Description |
Default |
---|---|---|
|
The confidence of detection. Value is between 0 and 100. |
|
|
Interface name. |
|
|
Set to 1 to enable ICAP server. Set to 0 to disable the ICAP server. |
|
|
Set to 1 to enable realtime FAI scan. Set to 0 to disable. |
|
|
The maximum waiting time for realtime FAI scan. |
|
|
ICAP server SSL port number. |
|
|
Set to 1 to enable SSL support. Set to 0 to disable it. |
|
|
ICAP server port. |
|