config system time manual

Use this command to manually configure the FortiNDR system time.

Accurate system time is required by many features such as log messages and SSL-secured connections.

This command applies only if NTP is disabled. Alternatively, you can configure FortiAI to synchronize its system time with an NTP server.

Syntax

config system time manual
    set daylight-saving-time {disable | enable}
    set zone <zone_int>
end

Variable	Description	Default
daylight-saving-time {disable | enable}	Enable to automatically adjust the system time for daylight-saving time (DST).	enable
zone <zone_int>	The number which indicates the time zone where the FortiAI unit is located.