Step 4: Validate Rule

1. Navigate to Users & Hosts > Adapters.

2. Search for rogue device MAC address that is expected to match rule.

3. Right click on adapter record and select Test Device Profiling Rule.

4. From drill-down menu, select the rule to be tested and click OK.

Note: If device matches a rule using WMI Profile method

• Host will appear under the Profiled Devices

• Adapter record fills in with any information collected from WMI Profile

If rule does not match as expected, refer to the following KB articles:

Rogue matching the wrong device profile

Rogue not matching any device profiles