Validate

Verify FortiNAC updates the database as devices connect to the switch.

1. In the Administration UI, navigate to the Ports view of the switch.

   Version 8.x: Network Device > Topology

   Version 9.x: Network > Inventory

2. Select the model of the switch to be tested and click the Ports tab.

3. Connect the computer to the desired switch port.

4. Verify on the switch the link is up and the computer’s MAC address is listed in the switch’s MAC address table.

5. After a few moments, the Ports view should update with the computer’s MAC address on the expected port. If not, click the refresh button in the upper right hand corner.