Device DB - Network Interface

You can view interface information about individual devices in the Device Manager tab.

This section also includes information on the following topics:

• Device zones
• Interface packet capture

To view interfaces for a device:

1. Go to the device database. See Displaying the device database.

2. In the device database, go to Network > Interfaces. The Interface pane is displayed.
   While viewing the interfaces table, you can toggle full screen mode by clicking Full Screen/Exit Full Screen.

To create aggregate interfaces for devices:

1. Go to the device database.

2. In the device database, go to Network > Interface.

3. Select Create New > Interface.

4. In the Type dropdown menu, select Aggregate.

5. Configure the aggregate interface details, and click OK.
   

6. (Optional) You can leave the Physical Interface Member field empty.

7. After the interface is created, you can deploy the interface to FortiGate.