Restoring the configuration

You can use the following procedure to restore your FortiManager configuration from a backup file on your management computer.

If your FortiManager unit is in HA mode, switch to Standalone mode.

If your FortiManager has management extensions enabled, the configuration for the enabled management extension is restored too.

The restore operation will temporarily disable the communication channel between FortiManager and all managed devices. This is a safety measure, in case any devices are being managed by another FortiManager. To re-enable the communication, please go to System Settings >Advanced >Advanced Settings and disable Offline Mode.

To restore the FortiManager configuration:

1. Go to System Settings > Dashboard.
2. In the System Information widget, click the restore button next to System Configuration. The Restore System dialog box opens.
3. Configure the following settings then select OK.

   Choose Backup File	Select Browse to find the configuration backup file you want to restore, or drag and drop the file onto the dialog box.
   Password	Type the encryption password, if applicable.
   Overwrite current IP, routing and HA settings	Select the checkbox to overwrite the current IP, routing, and HA settings.
   Restore in Offline Mode	Informational checkbox. Hover over the help icon for more information.