Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

interface

Use this command to edit the configuration of a FortiManager network interface.

Syntax

config system interface

edit <port>

set status {enable | disable}

set ip <ipv4_mask>

set allowaccess {http https ping snmp soc-fabric ssh webservice}

set serviceaccess {fclupdates fgtupdates webfilter-antispam}

set update-service-ip <ip&netmask>

set rating-service-ip <ip&netmask>

set lldp {enable | disable}

set speed {1000full 100full 100half 10full 10half auto}

set description <string>

set alias <string>

set mtu <integer>

set type {aggregate | physical | vlan}

set interface <string>

set vlanid <integer>

set vlan-protocol {8021ad | 8021q}

config member

edit <interface-name>

end

set lacp-mode

set lacp-speed {fast | slow}

set min-links <integer>

set min-links-down {administrative | operational}

set link-up-delay <integer>

set aggregate

config ipv6

set ip6-address <ipv6 prefix>

set ip6-allowaccess {http https https-logging ping snmp ssh webservice}

set ip6-autoconf {enable | disable}

end

end

Variable

Description

<port>

The port can be set to a port number such as port1, port2, port3, or port4. Different FortiManager models have different numbers of ports.

status {enable | disable}

Enable/disable the interface (default = enable). If the interface is disabled it does not accept or send packets. If you disable a physical interface, VLAN interfaces associated with it are also disabled.

ip <ipv4_mask>

Enter the interface IPv4 address and netmask. The IPv4 address cannot be on the same subnet as any other interface.

allowaccess {http https ping snmp soc-fabric ssh webservice}

Enter the types of management access permitted on this interface. Separate multiple selected types with spaces.

If you want to add or remove an option from the list, retype the list as required.

serviceaccess {fclupdates fgtupdates webfilter-antispam}

Enter the types of service access permitted on this interface. Separate multiple selected types with spaces. If you want to add or remove an option from the list, retype the list as required.

  • fclupdates: FortiClient updates access.
  • fgtupdates: FortiGate updates access.
  • webfilter-antispam: Web filtering and antispam access.

update-service-ip <ip&netmask>

The IP address for the FortiGate update service. It must be on the same subnet as the interface IP address.

This variable is only available when serviceaccess is fgtupdates.

rating-service-ip <ip&netmask>

The IP address for the FortiGate rating service. It must be on the same subnet as the interface IP address.

This variable is only available when serviceaccess is webfilter-antispam.

lldp {enable | disable}

Enable or disable the link layer discovery protocol (LLDP) (deafult = disable).

speed {1000full 100full 100half 10full 10half auto}

Enter the speed and duplexing the network port uses:

  • 100full: 100M full-duplex
  • 100half: 100M half-duplex
  • 10full: 10M full-duplex
  • 10half: 10M half-duplex
  • auto: Automatically negotiate the fastest common speed (default)

description <string>

Enter a description of the interface (character limit = 63).

alias <string>

Enter an alias for the interface.

mtu <integer>

Set the maximum transportation unit (68 - 9000, default = 1500).

type {aggregate | physical | vlan}

Set the type of interface (default = aggregate).

interface <string>

Set the underling interface name for the VLAN interface. This option is only available if the type is vlan.

vlanid <integer>

Set the VLAN ID (1 - 4094, default = 0).This option is only available if the type is vlan.

vlan-protocol {8021ad | 8021q}

Set the ethernet protocol of the VLAN (IEEE 802.1AD or IEEE 802.1Q, default = IEEE 802.1Q). This option is only available if the type is vlan.

member

Physical interfaces that belong to the aggregate or the redundant interface.

lacp-mode

Set the mode for LACP messages (default = active).

lacp-speed {fast | slow}

Set how often the interface sends LACP messages:

  • fast: Send LACP message every second.

  • slow: Send LACP message every 30 seconds (default).

min-links <integer>

Set the minimum number of aggregated ports that must be up (default = 1).

min-links-down {administrative | operational}

Action to take when less than the configured minimum number of links are active:

  • administrative: Set the aggregate administratively down.

  • operational: Set the aggregate operationally down (default).

link-up-delay <integer>

Set the number of milliseconds to wait before considering a link is up (default = 50).

aggregate

 

Variables for config member subcommand:

<interface-name>

Enter the interface name.

Variables forconfig ipv6 subcommand:

ip6-address <ipv6 prefix>

IPv6 address/prefix of interface.

ip6-allowaccess {http https https-logging ping snmp ssh webservice}

Allow management access to the interface.

ip6-autoconf {enable | disable}

Enable/disable address automatic configuration (SLAAC) (default = enable).

Example

This example shows how to set the FortiManager port1 interface IPv4 address and network mask to 192.168.100.159 and 255.255.255.0, and the management access to ping, https, and ssh.

config system interface

edit port1

set allowaccess ping https ssh

set ip 192.168.110.26 255.255.255.0

set status up

end

interface

Use this command to edit the configuration of a FortiManager network interface.

Syntax

config system interface

edit <port>

set status {enable | disable}

set ip <ipv4_mask>

set allowaccess {http https ping snmp soc-fabric ssh webservice}

set serviceaccess {fclupdates fgtupdates webfilter-antispam}

set update-service-ip <ip&netmask>

set rating-service-ip <ip&netmask>

set lldp {enable | disable}

set speed {1000full 100full 100half 10full 10half auto}

set description <string>

set alias <string>

set mtu <integer>

set type {aggregate | physical | vlan}

set interface <string>

set vlanid <integer>

set vlan-protocol {8021ad | 8021q}

config member

edit <interface-name>

end

set lacp-mode

set lacp-speed {fast | slow}

set min-links <integer>

set min-links-down {administrative | operational}

set link-up-delay <integer>

set aggregate

config ipv6

set ip6-address <ipv6 prefix>

set ip6-allowaccess {http https https-logging ping snmp ssh webservice}

set ip6-autoconf {enable | disable}

end

end

Variable

Description

<port>

The port can be set to a port number such as port1, port2, port3, or port4. Different FortiManager models have different numbers of ports.

status {enable | disable}

Enable/disable the interface (default = enable). If the interface is disabled it does not accept or send packets. If you disable a physical interface, VLAN interfaces associated with it are also disabled.

ip <ipv4_mask>

Enter the interface IPv4 address and netmask. The IPv4 address cannot be on the same subnet as any other interface.

allowaccess {http https ping snmp soc-fabric ssh webservice}

Enter the types of management access permitted on this interface. Separate multiple selected types with spaces.

If you want to add or remove an option from the list, retype the list as required.

serviceaccess {fclupdates fgtupdates webfilter-antispam}

Enter the types of service access permitted on this interface. Separate multiple selected types with spaces. If you want to add or remove an option from the list, retype the list as required.

  • fclupdates: FortiClient updates access.
  • fgtupdates: FortiGate updates access.
  • webfilter-antispam: Web filtering and antispam access.

update-service-ip <ip&netmask>

The IP address for the FortiGate update service. It must be on the same subnet as the interface IP address.

This variable is only available when serviceaccess is fgtupdates.

rating-service-ip <ip&netmask>

The IP address for the FortiGate rating service. It must be on the same subnet as the interface IP address.

This variable is only available when serviceaccess is webfilter-antispam.

lldp {enable | disable}

Enable or disable the link layer discovery protocol (LLDP) (deafult = disable).

speed {1000full 100full 100half 10full 10half auto}

Enter the speed and duplexing the network port uses:

  • 100full: 100M full-duplex
  • 100half: 100M half-duplex
  • 10full: 10M full-duplex
  • 10half: 10M half-duplex
  • auto: Automatically negotiate the fastest common speed (default)

description <string>

Enter a description of the interface (character limit = 63).

alias <string>

Enter an alias for the interface.

mtu <integer>

Set the maximum transportation unit (68 - 9000, default = 1500).

type {aggregate | physical | vlan}

Set the type of interface (default = aggregate).

interface <string>

Set the underling interface name for the VLAN interface. This option is only available if the type is vlan.

vlanid <integer>

Set the VLAN ID (1 - 4094, default = 0).This option is only available if the type is vlan.

vlan-protocol {8021ad | 8021q}

Set the ethernet protocol of the VLAN (IEEE 802.1AD or IEEE 802.1Q, default = IEEE 802.1Q). This option is only available if the type is vlan.

member

Physical interfaces that belong to the aggregate or the redundant interface.

lacp-mode

Set the mode for LACP messages (default = active).

lacp-speed {fast | slow}

Set how often the interface sends LACP messages:

  • fast: Send LACP message every second.

  • slow: Send LACP message every 30 seconds (default).

min-links <integer>

Set the minimum number of aggregated ports that must be up (default = 1).

min-links-down {administrative | operational}

Action to take when less than the configured minimum number of links are active:

  • administrative: Set the aggregate administratively down.

  • operational: Set the aggregate operationally down (default).

link-up-delay <integer>

Set the number of milliseconds to wait before considering a link is up (default = 50).

aggregate

 

Variables for config member subcommand:

<interface-name>

Enter the interface name.

Variables forconfig ipv6 subcommand:

ip6-address <ipv6 prefix>

IPv6 address/prefix of interface.

ip6-allowaccess {http https https-logging ping snmp ssh webservice}

Allow management access to the interface.

ip6-autoconf {enable | disable}

Enable/disable address automatic configuration (SLAAC) (default = enable).

Example

This example shows how to set the FortiManager port1 interface IPv4 address and network mask to 192.168.100.159 and 255.255.255.0, and the management access to ping, https, and ssh.

config system interface

edit port1

set allowaccess ping https ssh

set ip 192.168.110.26 255.255.255.0

set status up

end