BGP Neighbors
When configuring SD-WAN per-device, you can add Border Gateway Protocol (BGP) neighbors.
You must create BGP neighbors for FortiGate devices before you can add them to the SD-WAN network. See Device DB - Router BGP.
To add BGP neighbors:
- Go to the device database. See Displaying the device database.
- In the device database, go to System > SD-WAN.
The SD-WAN pane opens.
- In the Neighbor section, click Create New.
The Create New Neighbor dialog box is displayed.
- Set the options, and click OK.
The neighbor is created.
- Click Apply.
The SD-WAN settings are saved.