Reviewing the SD-WAN configuration in FortiManager 6.4
This section describes what SD-WAN settings to review in FortiManager 6.4 before upgrading to FortiManager 7.0.
The interface members use per-device mapping.
To review SD-WAN settings in FortiManager 6.4:
- Go to Device Manager > Device & Groups, and ensure all devices used for SD-WAN have been added to FortiManager and authorized, and the configuration is synchronized.
In the following example, all devices are visible:
- HUB
- Branch 1
- Branch 2
- In Device Manager, go to SD-WAN > Interface Members.
In this example, the following interfaces are displayed, and they are configured with per-device mappings:
- port2
- port3
- vpn_dc1-1
- vpn_dc1-2
- Double-click each interface to display its details, and then click Cancel to close the pane.
Notice that Per-Device Mapping is enabled for each interface.
For example, double-click the interface named port2 to display its settings.
Following are the settings for the interface named port3.
Following are the settings for interface vpn_dc1-1.
Following are the settings for interface vpn_dc1-2.
- Click Health-Check Servers to ensure health-check servers are configured for SD-WAN.
The following example uses several health-check servers.
- Click SD-WAN Templates to review the SD-WAN template.
The following example uses an SD-WAN template named sdwan-branch.
- Double-click the SD-WAN template to open it and review its settings.