Connected clients

The Client Connected option in the quick status bar displays detailed information about the health of individual WiFi connections.

To view WiFi clients:

1. Go to AP Manager .
2. In the tree menu, go to Device & Groups > Managed FortiGate (#), and select a managed device. Alternatively, you can select a device in a group, see FortiAP groups.
3. In the quick status bar, click Client Connected. The View WiFi Clients table is displays a list of all the clients in the selected FortiGate.
4. To view the clients connected to specific APs, right-click the AP and select View Clients.

   

The following columns are available:

SSID	The SSID that the client connected to.
FortiAP	The serial number of the FortiAP unit that the client connected to.
IP	The IP address assigned to the wireless client.
Device	The type of device that the client is using.
Channel	The wireless radio channel that is used.
Bandwidth Tx/Rx	Client received and transmitted bandwidth, in Kbps.
Signal Strength/Noise	The signal-to-noise ratio in dBs calculated from signal strength and noise level.
Signal Strength	The relative signal strength of the AP.
Association Time	How long the client has been connected to this access point.
Authentication	The type of authentication used.
Bandwidth RX	Client received bandwidth, in Kbps.
Bandwidth TX	Client transmitted bandwidth, in Kbps.
Device OS	The OS version on the FortiAP.
Host Information	The host name of the WiFi client, if available.
Idle Time	The amount of time that the client has been idle.
Manufacturer	The manufacturer of the client device.
Rate	The connection rate between the WiFi client and the AP.
Name	The name of the FortiGate device that the FortiAP is attached to.