Virtual wire pair policy
The section describes how to create virtual wire pair policies. Before you can create a policy, you must create a virtual wire pair. See Configuring virtual wire pairs.
|
You must display the option before you can set it. On the Policy & Objects pane, from the Tools menu, select Display Options, and then select the IPv4 Virtual Wire Pair Policy checkbox to display this option. |
To create a virtual wire pair policy:
- If using ADOMs, ensure that you are in the correct ADOM.
- Go to Policy & Objects > Policy Packages.
- In the tree menu for the policy package in which you will be creating the new policy, select IPv4 Virtual Wire Pair Policy.
- Click Create New, or, from the Create New menu, select Insert Above or Insert Below. By default, policies will be added to the bottom of the list. The Create New Policy pane opens.
- Enter the following information, then click OK to create the policy:
ID
Enter a unique number as the policy ID, or use the default (0) to automatically assign a policy ID. Policy IDs can be up to a maximum of 9 digits in length.
Once a policy ID has been configured it cannot be changed.
Name
Enter a unique name for the policy. Each policy must have a unique name.
Virtual Wire Pair Interface
Select one or more interface. You can type the name of the interface to search for it in the list.
Virtual Wire Pair
Select an arrow to indicate the flow of traffic between ports.
Source Internet Service
Turn source internet service on or off, then select services from the Object Selector frame, or drag and drop them from the object pane.
Source Address
Select source addresses.
This option is only available when Source Internet Service is off.
Source User
Select source users.
This option is only available when Source Internet Service is off.
Source User Group
Select source user groups.
This option is only available when Source Internet Service is off.
Source Device
Select source devices, device groups, and device categories.
This option is only available when Source Internet Service is off.
Internet Service
Toggle ON to enable Internet service. Toggle OFF to disable Internet service.
Destination Internet Service
Turn destination internet service on or off, then select services.
Destination Address
Select destination addresses, address groups, virtual IPs, and virtual IP groups.
This option is available when Destination Internet Service is OFF.
Service
Select services and service groups.
This option is available when Destination Internet Service is OFF.
Schedule
Select schedules, one time or recurring, and schedule groups.
Action
Select an action for the policy to take: Deny or Accept.
Log Traffic
When the Action is DENY, select Log Violation Traffic to log violation traffic.
When the Action is ACCEPT, select one of the following options:
- No Log
- Log Security Events
- Log All Sessions
Generate Logs when Session Starts
Select to generate logs when the session starts.
Capture Packets
Select to capture packets.
This option is available when the Action is ACCEPT and Log Security Events or Log All Sessions is selected
Security Profiles
Select to add security profiles or profile groups.
This option is available when Action is Accept.
The following profile types can be added:
- Antivirus Profile
- Web Filter Profile
- Application Control
- IPS Profile
- Email Filter Profile
- DLP Sensor
- VoIP Profile
- ICAP Profile
- SSL/SSH Inspection
- Web Application Firewall
- DNS Filter
- Proxy Options
- Profile Group (available when Use Security Profile Group is selected)
Shared Shaper
Select traffic shapers.
This option is available if the Action is ACCEPT or IPSEC.
Reverse Shaper
Select traffic shapers.
This option is available if the Action is ACCEPT or IPSEC and at least one forward traffic shaper is selected.
Per-IP Shaper
Select per IP traffic shapers.
This option is available if the Action is ACCEPT or IPSEC.
Description
Add a description of the policy, such as its purpose, or the changes that have been made to it.
Advanced Options
Configure advanced options, see Advanced options.
For more information on advanced option, see the FortiOS CLI Reference.