API proxy daemon test usage:

• 1: show PID
• 2: show statistics and state
• 20: fsa tracer log request
• 21: fsa tracer log request
• 99: restart daemon

Archd daemon test usage:

• 1: usage
• 2: display content subdir info file
• 3: force scan to archive ips files
• 4: force preen content files
• 99: restart daemon

Clusterd daemon test usage:

• 1: Daemon info (PID, meminfo, backtrace ...)
• 2: Thread pool status
• 3: Log Cluster core
• 4: Devices cache module
• 5: Logging Topology module
• 6: Avatar uploading module
• 7: Meta-CSF uploading module
• 8: Meta-InterfaceRole module
• 9: Tunnel module
• 10: oftpd file fwd module
• 11: Service module
• 97: HA module
• 98: Monitor status
• 99: Restart clusterd
• 100: Restart clusterd and clusterd-monitor
• 102: Various tests
• 103: generate core dump (on or off) when cluster.monitor kills cluster.main

Execmd daemon test usage:

• 1: show PID
• 2: show statistics and state
• 3: reset statistics and state
• 4: show statistics of cmd tool
• 5: reset statistics of cmd tool
• 99: restart daemon

Fabricsyncd daemon test usage.

Fazcfg daemon test usage:

• 1: Daemon info (PID, meminfo, backtrace ...)
• 2: show statistics
• 3: show merged ca info

• 40: DVM cache diag info

• 41: CSF diag info

• 42: IntfRole diag info

• 43: reload csf info in devtable

• 44: show log device group stats

• 45: check log device group

• 46: metadata table diag info [sub-module]

• 48: test update link prefixes file

• 49: test update webfilter categories description file

• 50: test get app icon
• 51: test update app logo files
• 52: dvm call stats
• 53: dvm call stats clear
• 54: check ips/app meta-data update
• 55: log disk readahead get
• 56: log disk readahead toggle
• 57: fix redis service
• 58: check redis service
• 59: test update faz license

• 60: test fortigate restful api

• 65: log aggregation server stats

• 66:log aggregation server stats toggle (debug only)

• 67: test redis security connect [port] [key] [value]

• 82: list avatar meta-data

• 83: rebuild avatar meta-data table

• 84: rebuild ips meta-data table
• 85: rebuild app meta-data table
• 86: rebuild FortiClient Vulneribility meta-data table

• 88: update ffdb meta-data

• 90: use built-in TIDB package and disable updating it

• 91: enable updating TIDB package

• 92: disable updating TIDB package

• 93: switch on/off adom default report schedule

• 94: switch on/off report schedule by name

• 97: set 'force_restore_data' flag for clickhouse start

• 99: restart daemon

This test is only functional when FortiAnalyzer features are enabled

Fazmaild daemon test usage:

• 1: show PID and daemon status
• 2: show runtime status
• 90: pause sending mail
• 91: resume sending mail
• 99: restart fazmaild daemon

This test is only functional when FortiAnalyzer features are enabled

Faznotify daemon test usage:

• 1: Daemon info (PID, meminfo, backtrace ...)
• 2: show faznotify statistics [clear]
• 10: send a faznotify <adom> <id> <send-data>
• 20: show active channel
• 29: delete active channel <adom> <id>
• 30: pause active channel <seconds>
• 99: restart

This test is only functional when FortiAnalyzer features are enabled

Fazsvcd daemon test usage:

• 1: Daemon info (PID, meminfo, backtrace ...)
• 2: show daemon stats and status
• 3: list async search threads
• 4: dump async search slot info
• 5: show cache builder stats
• 6: dump cache builder playlist
• 7: dump log search filters
• 10: show database log stats aggregated per day
• 11: show received log stats aggregated per day
• 20: show avatar request stats
• 50: enable or disable cache builder
• 51: enable or disable auto custom index
• 57: Fazbroker stats
• 58: reset Fazbroker stats
• 60: rawlog idx cache test
• 61: logbrowse cache stats
• 62: FortiView Session Stats
• 70: show stats for device vdom cache
• 71: show stats for remote fortiview and reports
• 72: show filterable and sortable fields for fortiview. <v3.0 view name>
• 75: data masking test: <passwd> <plaint test> <1|0 (high secure)> [do_unmasking]
• 76: fazsvcd fabric service diagnostics
• 99: restart daemon
• 100: log FAZ debugs
• 101: Close FAZ debug log
• 200: gui api test
• 201: diag for jsonrpc ..

This test is only functional when FortiAnalyzer features are enabled

Fazwatchd daemon test usage:

• 1: show process summary and report stats
• 2: show playbook stats
• 4: show nac asset stats
• 5: show playbook task log
• 6: show ha command execution stats
• 7: show casb metadata stats
• 8: show ems metadata stats
• 9: show pgsvr.log monitor stats
• 99: restart daemon

This test is only functional when FortiAnalyzer features are enabled

Filefwd daemon test usage:

• 1: show daemon PID
• 2: show daemon stats
• 3: show threads stats
• 99: restart daemon

Fileparsed daemon test usage:

• 1: show PID
• 2: show statistics and state
• 3: show devtable local cache status
• 4: reload devtable local cache.
• 11: show FortiGate interface cache status
• 12: show FortiGate interface parsers status
• 13: show FortiGate interface archived files disk usage
• 14: show FortiGate interface archived files retention days
• 15: show FortiGate interface info
• 16: show total number of interfaces trimmed from database
• 17: show FortiGate policy files process status
• 18: show total number of policy records in database
• 98: rebuild FortiGate interface SQL tables
• 99: restart daemon

Fortilogd Diag test usage:

• 1: Daemon info (PID, meminfo, backtrace ...)
• 2: dump message status
• 3: logstat status
• 4: client devices status
• 5: print log received
• 6: switch on/off debug messages
• 7: log forwarding prep status
• 8: show logUID info
• 9: device log cache reloading status
• 10: dz_client cache status
• 11: file stats

• 12: stop/restart receiving logs

• 14: show cached adom lograte status

• 15: show cached adom log volume status

• 16: show appevent logs receiving info

• 17: show logging rate of the system and per-device

• 90: show or set fortilogd working status

• 95: show runtime logs. option format: pid=0:current,-1:all,PID duration=DURA filter=STR

• 98: memory check

• 99: restart fortilogd

Logfile daemon test usage:

• 1: Daemon info (PID, meminfo, backtrace ...)
• 2: show statistics and state
• 4: show ADOM statistics
• 5: show device statistics
• 6: show auto-del statistics
• 7: show log file disk usage
• 8: update log file disk usage
• 9: show inode usage
• 10: enable or disable debug filterof device and vdom
• 11: du cache diag commands
• 12: force to checkthe oldest log litime when trim log files.
• 90: reset statistics and state
• 91: force to preen content files info
• 99: restart daemon

Logfwd daemon test usage:

• 1: Daemon info (PID, meminfo, backtrace ..)
• 2: Dump thread-pool status
• 3: Dump log-forward configurations
• 4: Dump log-forwarding status
• 5: Overall and converter stats
• 6: Dump HA CID info
• 7: show runtime logs. option format: pid=0:current,-1:all,PID duration=DURA filter=STR
• 8: show cfile list status [all: for all cfiles]
• 9: show max durationof loss in memory mode, 120 seconds default, 0 to disable memory mode
• 10: Force logfwd to run in disk mode [1:enable, 0:disable]
• 97: memory check
• 98: Reset log-forwarding stats
• 99: Restart logfwd

Log-fetch daemon test usage:

• 1: show PID
• 2: show states
• 3: show running sessions
• 99: restart the daemon

Miglogd daemon test usage:

• 1: show PID
• 2: dump memory pool
• 99: restart daemon

Oftpd daemon test usage:

• 1: show PID
• 2: show statistics and state
• 3: show connected device name and IP
• 4: show detailed session state
• 5: show oftp request statistics
• 6: show cmdb device cache
• 7: show logfwd thread stats
• 8: show tasklist statistics
• 9: show unreg dev cache
• 10: log cluster bridge stats
• 12: show HA group cache
• 13: show file fwd stats
• 14: show fct software inventory cache
• 15: show fgt interface stats
• 16: show fos-auto device dump. [dev] to dump device list
• 17: show device logging rate & rate-limit. [enable] to force tracking log-rate or [disable] to track only rate-limited devices. [config] to show config
• 18: show fgt policy info, [dev] to dump device list
• 21: dump oftp-restapi-sched stats
• 22: dump oftp-restapi-sched status
• 23: dump oftp csf member status
• 30: dump csf groups data in all adoms in json string
• 31: show csf groups update stats
• 32: reschedule all restapi task for designated devid
• 40: test loading a CA cert from local path
• 50: display logtypes for all devid
• 60: display login requests stats
• 80: set region
• 90: reload un-reg device tree
• 91: delete designated csf group
• 92: reload reg dev cache
• 95: debug output
• 99: restart daemon

Sqlrptcache daemon test usage:

• 1: show PID
• 2: show statistics and state
• 3: reset statistics and state
• 4: list adoms
• 6: list schedules
• 55: re-check an adom
• 99: restart daemon
• 910: enable rptchkd
• 911: disable rptchkd

Scansched daemon test usage:

• 1: show PID
• 2: show statistics and state
• 3: reset statistics and state
• 11: show ioc-rescan task status
• 99: restart daemon

Siemagentd daemon test usage:

• 1: show PID

• 2: show daemon statistics

• 3: show daemon worker statistics

• 4: show daemon worker status stats

• 5: show supported device-log types

• 11: worker process run

• 12: worker process suspend

• 13: worker process exit

• 20: show the siem stream storage info

• 21: show the latest siem stream submitted in redis

• 99: restart daemon

• 200: diag for log based alert (event mgmt)

• 205: diag for endpoint and enduser

Siemdbd daemon test usage:

• 1: Daemon info (PID, meminfo, backtrace ...)

• 2: show statistics and state

• 3: show running processes

• 4: show writers info

• 5: show splitter info

• 6: show Adom database info

• 7: show trimmer info

• 8: show the shared Materialized View disk usage info

• 9: set/reset max memory usage ratio

• 10: add or drop skip indices on SIEM table

• 41: show writer 1 info

• 42: show writer 2 info

• 43: show writer 3 info

• 97: clear redis stream

• 99: restart daemon

SNMP daemon test usage:

• 1: display daemon pid
• 2: display snmp statistics
• 3: clear snmp statistics
• 4: generate test trap (cpu high)
• 5: generate test traps (log alert, rate, data rate)
• 6: generate test traps (licensed gb/day, device quota)
• 99: restart daemon

SqlLog daemon test usage:

• 1: Daemon info (PID, meminfo, backtrace ...)
• 2: show statistics and state
• 3: show worker init state
• 4: show worker thread info
• 5: show log device scan info, optionally filter by <devid>
• 7: show ADOM device list by <adom-name>
• 8: show logUID info
• 9: show ADOM scan sync info, optionally filter by <adom>
• 10: show FortiClient dev to sql-ID (sID) map
• 11: show devtable cache info
• 12: show intfrole cache info
• 41: show worker 1 info
• 51: show worker 1 registered log devices
• 61: show worker 1 open log file cache
• 70: show sql database building progress
• 71: show the progress of upgrading log files into per-vdom storage
• 72: run the upgrading log files into per-vdom storage
• 80: show daemon status flags
• 81: show debug zone devices status
• 82: show all adoms with member devices or filer by <adom-name>
• 83: show all registered logdevs
• 84: show all unreg logdevs
• 85: show fazid map stats
• 91: diag worker devvd loadbalance
• 95: request to rebuild SQL database for local event logs
• 96: resend all pending batch files to sqlplugind
• 97: rebuilding warm restart
• 98: set worker assignment to policy 'round-robin' or 'adom-affinity', daemon will restart on policy change.
• 99: restart daemon
• 200: diag for log based alert (event mgmt) ..
• 201: diag for utmref cache ..
• 202: diag for fgt-fct corelation ..
• 203: diag for logstat ..
• 204: diag for IoC ..
• 205: diag for endpoint and enduser ..
• 206: diag for ueba ..
• 207: diag for FSA scan session ..
• 208: diag for audit report event process ..
• 209: diag for shadow it info ..
• 221: estimated browsing time stats
• 222: fsa devmap cache info
• 224: fgt lograte cache info
• 225: dump enum field error cache
• 226: reset enum field error cache
• 227: dump tz field error cache
• 228: reset tz field error cache

Sqlplugind daemon test usage:

• 1: Daemon info (PID, meminfo, backtrace ...)
• 2: show daemon stats
• 3: show SIEM table stats
• 4: show table compressor stats
• 5: show table compressor Adom stats
• 6: show table slow upgrade info
• 91: scan hcache query templates and clean up unused
• 98: scan and clean zombie cstore files
• 99: restart daemon

Sqlreportd daemon test usage:

• 1: Daemon info (PID, meminfo, backtrace ...)
• 2: show daemon stats
• 3: show restorable table schema
• 4: show restorable table status
• 99: restart daemon

Sqlrptcache daemon test usage:

• 1: Daemon info (PID, meminfo, backtrace ...)
• 2: show statistics and state
• 3: reset statistics and state
• 5: dump auto-cache charts
• 99: restart daemon

Syncsched daemon test usage:

• 1: Daemon info (PID, meminfo, backtrace ...)
• 2: show report nodes states
• 3: show report syncing state
• 4: show ha sync peers
• 5: reset ha sync queue
• 6: show ha elog sync
• 10: sync reports with peer
• 11: fsync stat
• 12: fsync reload
• 13: trim sync dir stat
• 99: restart daemon

Test the connection to the FortiAnalyzer.

Test the connection to the mail server.

Get configuration check-in information from the FortiGate.

Flush all policy check sessions.

Flush all search sessions.

SFTP server IP address.

SFTP server username.

SFTP server password.