fwm-setting
Use this command to configure firmware management settings.
Syntax
config fmupdate fwm-setting
set auto-scan-fgt-disk {enable | disable}
set check-fgt-disk {enable | disable}
set fds-failover-fmg {enable | disable}
set fds-image-timeout <integer>
set immx-source {cloud | fgt | fmg}
set log {fwm | fwm_dm | fwm_dm_json}
set multiple-steps-interval <integer>
end
|
Variable |
Description |
|---|---|
|
auto-scan-fgt-disk {enable | disable} |
Enable/disable automatic scanning of a FortiGate disk when required (default = enable). |
|
check-fgt-disk {enable | disable} |
Enable/disable checking a FortiGate disk prior to upgrading the image (default = enable). |
|
fds-failover-fmg {enable | disable} |
Enable/disable using the a local image file on the FortiManager when the FDS download fails (default = enable). |
|
fds-image-timeout <integer> |
Set the timer for FortiGate image downloads from FortiGuard, in seconds (300 - 3600, default = 1800). |
|
immx-source {cloud | fgt | fmg} |
Configure which of the IMMX file to be used for choosing the upgrade patch:
The default file is the one for FortiManager (default = fmg). |
|
log {fwm | fwm_dm | fwm_dm_json} |
Configure log setting for the firmware manager daemon (default = fwm_dm):
|
|
multiple-steps-interval <integer> |
Set the waiting time between multiple step upgrades, in seconds (30 - 180, default = 60). |