Configuring dynamic firewall addresses for fabric connectors

You cannot import address names to fabric connectors created for Microsoft Azure and Nuage Virtualized Services Platform. Instead you must create dynamic firewall objects that can be dynamically populated when FortiGate communicates with Microsoft Azure and Nuage Virtualized Services Platform.

To configure dynamic firewall addresses for Microsoft Azure fabric connectors:

1. Go to Policy & Objects > Object Configurations.
2. In the tree menu, go to Firewall Objects > Addresses.
3. In the content pane, click Create New and select Address.
4. Complete the following options for Microsoft Azure fabric connectors:

   Address Name	Type a name for the firewall address object.
   Type	Select Dynamic.
   Sub Type	Select SDN.
   SDN Connector	Select the Microsoft Azure fabric connector.
   Filter	Type the name of the filter for the AWS instance.

5. Set the remaining options as required, and click OK

To configure dynamic firewall addresses for Nuage fabric connectors:

1. Go to Policy & Objects > Object Configurations.
2. In the tree menu, go to Firewall Objects > Addresses.
3. In the content pane, click Create New and select Address.
4. Complete the following options for Nuage fabric connectors:

   Address Name	Type a name for the firewall address object.
   Type	Select Dynamic.
   Sub Type	Select SDN.
   SDN Connector	Select the Nuage Virtualized Services Platform fabric connector.
   Organization	Type the name of the organization for the Nuage Virtualized Services Platform.
   Subnet Name	Type the name of the subnet for the Nuage Virtualized Services Platform.
   Policy Group	Type the name of the policy group for the Nuage Virtualized Services Platform.

5. Set the remaining options as required, and click OK