Creating FortiSwitch templates
When creating a new FortiSwitch template, the platform must be selected before configuring VLAN assignments.
To create a FortiSwitch template:
- On the FortiSwitch Template pane, click Create New in the toolbar. The Create New FortiSwitch Template window opens.
- Enter the following information, then click OK to create the new template.
Template Name
Type a name for the template.
Comments
Optionally, enter comments.
Platforms
Select the platform that the template will apply to from the dropdown list.
Switch VLAN Assignments
Configure VLAN assignments. A platform must be selected before VLAN assignments can be configured.
Add Port
Add a port to the table.
Create Trunk
Create a trunk. See To create a trunk group:.
Edit
Edit the selected trunk.
Delete
Delete the selected ports or trunks.
Port
Select a port profile from the dropdown list.
Native VLAN
Select the native VLAN from the available VLAN objects. See FortiSwitch VLANs.
Allowed VLAN
Select the allowed VLAN from the available VLAN objects. See FortiSwitch VLANs.
Security Policy
Select the security policies from the available switch controller security policies. See FortiSwitch security policies.
POE
If applicable, right-click to enable or disable PoE for the port.
DHCP Blocking
Right-click to enable or disable DHCP blocking for the port or trunk.
If the port is in a trunk, then DHCP blocking can only be enabled for the trunk, and not the individual ports.
IGMP Snooping
Right-click to enable or disable IGMP snooping for the port or trunk.
If the port is in a trunk, then IGMP snooping can only be enabled for the trunk, and not the individual ports.
Loop Guard
Right-click to enable or disable Loop Guard for the port.
Loop Guard cannot be applied to trunks, or ports that are in trunks.
STP
Right-click to enable or disable STP for the port or trunk.
If the port is in a trunk, then STP can only be enabled for the trunk, and not the individual ports.
Edge Port
Right-click to enable or disable Edge Port for the port or trunk.
If the port is in a trunk, then STP can only be enabled for the trunk, and not the individual ports.
STP BPDU Guard
Right-click to enable or disable STP BPDU Guard for the port or trunk.
If the port is in a trunk, then STP BPDU Guard can only be enabled for the trunk, and not the individual ports.
STP Root Guard
Right-click to enable or disable STP Root Guard for the port or trunk.
If the port is in a trunk, then STP Root Guard can only be enabled for the trunk, and not the individual ports.
To create a trunk group:
- On the Create New FortiSwitch Template pane, click Create Trunk in the Switch VLAN Assignments toolbar. The New Trunk Group dialog box opens.
- Enter a name for the trunk group in the Name field.
- In the Members field, select all the ports that will be in the group from the drop-down list.
- Select the mode: lacp-active (active link aggregation), lacp-passive (passive link aggregation), or static.
- Click OK to create the trunk group.