ntp
Use this command to configure automatic time setting using a network time protocol (NTP) server.
Syntax
config system ntp
set status {enable | disable}
set sync_interval <string>
config ntpserver
edit <id>
set ntpv3 {disable | enable}
set server <string>}
set authentication {disable | enable}
set key <passwd>
set key-id <integer>
end
end
|
Variable |
Description |
|---|---|
|
status {enable | disable} |
Enable/disable NTP time setting. Default: |
|
sync_interval <string> |
Enter the time, in minutes, how often the FortiManager unit synchronizes its time with the NTP server. Range: 1 to 1440 (minutes). Default: |
|
Variables for |
|
|
ntpv3 {disable | enable} |
Enable/disable NTPv3. Default: |
|
server <string>} |
Enter the IPv4 address or fully qualified domain name of the NTP server. |
|
authentication {disable | enable} |
Enable/disable MD5 authentication. Default: |
|
key <passwd> |
The authentication key. String maximum: 63 characters |
|
key-id <integer> |
The key ID for authentication.
Default: |