system disclaimer
Use this command to enable system-wide disclaimer messages or other inserted text, and whether or not domain-specific disclaimers can be configured in protected domains.
A disclaimer message is text that is added to email to warn the recipient that the email contents may be confidential, or other information required by law, such as unsubscribe links or office addresses. However you could use this feature to insert other text and images, too.
Disclaimer messages can be appended for either or both incoming or outgoing email messages. See information on determining the directionality of an email message on FortiMail.
Syntax
config system disclaimer
set disclaimer-status {enable | disable}
set disclaimer-per-domain {enable | disable}
set exclude-status {enable | disable}
set disclaimer-insertion {selected-message | all-message}
end
|
Variable |
Description |
Default |
||
|
Enable if you do not want to insert disclaimers in the email with specific senders or recipients. Also configure system disclaimer-exclude. |
disable |
|||
|
Enable to insert system-wide disclaimers for incoming and/or outgoing email. Also configure system disclaimer-message. |
disable |
|||
|
Select when to insert the disclaimer, either:
|
selected-message |
|||
|
Enable to allow protected domains to select from either the system-wide disclaimers, or to configure disclaimers that are specific to each protected domain. Also configure disclaimer-status {disabled | use-domain-setting | use-system-setting}. Disable to require that all protected domains use the system-wide disclaimer settings. |
disable |
