telnettest
Use this command to test Telnet connectivity to a specified host.
Syntax
execute telnettest {<fqdn_str> | <host_ipv4>}[:<port_int>]
|
Variable |
Description |
Default |
|
Enter the IP address or fully qualified domain name (FQDN) of the Telnet server. |
|
|
|
If the Telnet server listens on a port number other than port 23, enter a colon (:) followed by the port number. |
:23 |
Example
This example tests the connection to an Telnet server at 192.168.1.10 on port 2323.
execute telnettest 192.168.1.10:2323
The CLI displays the following:
(using 192.168.1.20 to connect)
Remote Output(hex):
FF FD 18 FF FD 20 FF FD
23 FF FD 27
Connection Status:
Connecting to remote host succeeded.