mailsetting storage central-quarantine
Use this command to configure centralized storage of quarantined email. This command is only available on high-end models.
To reduce the storage resources required on lower-end FortiMail units, you can configure them to store quarantined email on a high-end FortiMail unit that you have configured to act as a centralized quarantine server.
Syntax
config mailsetting storage central-quarantine
set remote-storage-type {disable | from-client | to-server-over-ssl | to-server-plain | unknown}
set client-ip <client_ipv4>
set server-host <server_ipv4>
set server-name <name_str>
end
|
remote-storage-type {disable | from-client | to-server-over-ssl | to-server-plain | unknown}
|
Enter one of the following centralized quarantine types:
disable: Centralized quarantine storage is
disabled. The FortiMail unit stores its quarantines
locally, on its own hard disks.from-client: Select this option to allow the
FortiMail unit to act as a central quarantine server
and receive quarantined messages from other
client FortiMail units. Also configure client-ip
<client_ipv4> of the FortiMail clients. Note this
feature is only available on the high-end FortiMail
models (FortiMail 1000D and above).to-server-over-ssl: Same as
to-server-plain, except the connection uses
SSL.to-server-plain: Select this option to
allow the FortiMail unit to act as a central
quarantine client and send quarantined messages
to the remote server in plain text. Also configure
server-name <name_str> and server-host
<server_ipv4> of the remote server. All
FortiMail units can act as clients.unknown: Centralized quarantine storage is
unknown.
|
disable
|
|
client-ip <client_ipv4>
|
This option applies only if remote-storage-type is set to from-client.
Enter the IP address of the FortiMail unit that is allowed to store its quarantined email on this high-end FortiMail unit.
For FortiMail 1000D, 2000A, 2000B, and VM04 models, you can enter a maximum of 10 IP addresses as clients. For FortiMail 3000C and above models, you can enter a maximum of 20 IP addresses.
|
|
|
server-host <server_ipv4>
|
This option applies only if remote-storage-type is set to to-server-over-ssl or to-server-plain.
Enter the IP address of the FortiMail unit that is acting as the central quarantine server.
|
|
|
server-name <name_str>
|
This option applies only if remote-storage-type is set to to-server-over-ssl or to-server-plain.
Enter the name of the FortiMail unit that is acting as the central quarantine server. This name may be the host name or any other name that uniquely identifies the central quarantine server.
|
|
Related topics
mailsetting proxy-smtp
mailsetting relay-host-list
mailsetting storage central-quarantine
mailsetting systemquarantine
mailsetting storage central-quarantine
