Fortinet black logo

Version:

7.4.0
7.2.4
7.2.3

Version:

7.2.2
7.2.1
7.2.0

Version:

7.0.6
7.0.5
7.0.5

Version:

7.0.4
7.0.3
7.0.2

Version:

7.0.1
7.0.0
6.4.8

Version:

6.4.7
6.4.6
6.4.5

Version:

6.4.4
6.4.3
6.4.2

Version:

6.4.1
6.4.0
6.2.0

Version:

6.0.4
6.0.3
6.0.1

Version:

6.0.0
5.4.9
5.4.8

Version:

5.4.6
5.4.5
5.4.4

Version:

5.4.3
5.4.0

Table of Contents

CLI Reference

6.4.6
7.4.0
7.2.4
7.2.3
7.2.2
7.2.1
7.2.0
7.0.6
7.0.5
7.0.5
7.0.4
7.0.3
7.0.2
7.0.1
7.0.0
6.4.8
6.4.7
6.4.6
6.4.5
6.4.4
6.4.3
6.4.2
6.4.1
6.4.0
6.2.0
6.0.4
6.0.3
6.0.1
6.0.0
5.4.9
5.4.8
5.4.6
5.4.5
5.4.4
5.4.3
5.4.0
Download PDF
Copy Doc ID db37531d-ba69-11ec-9fd1-fa163e15d75b:88625
Copy Link

system snmp community

Use this command to configure simple network management protocol (SNMP) v1/2 settings.

These commands apply only if the SNMP agent is enabled. For details, see status {enable | disable}.

Syntax

config system snmp community

edit <index_int>

config host

edit <index_int>

set ip <address_ipv4>

set name <name_str>

set queryportv1 <port_int>

set queryportv2c <port_int>

set queryv1-status {enable | disable}

set queryv2c-status {enable | disable}

set status {enable | disable}

set trapevent {cpu | deferred-queue | ha | ip-change | logdisk | maildisk | mem | raid | remote-storage | spam | system | virus}

set trapportv1_local <port_int>

set trapportv1_remote <port_int>

set trapportv2c_local <port_int>

set trapportv2c_remote <port_int>

set trapv1_status {enable | disable}

set trapv2c_status {enable | disable}

end

Related topics

system snmp sysinfo

system snmp threshold

Previous
Next

system snmp community

Use this command to configure simple network management protocol (SNMP) v1/2 settings.

These commands apply only if the SNMP agent is enabled. For details, see status {enable | disable}.

Syntax

config system snmp community

edit <index_int>

config host

edit <index_int>

set ip <address_ipv4>

set name <name_str>

set queryportv1 <port_int>

set queryportv2c <port_int>

set queryv1-status {enable | disable}

set queryv2c-status {enable | disable}

set status {enable | disable}

set trapevent {cpu | deferred-queue | ha | ip-change | logdisk | maildisk | mem | raid | remote-storage | spam | system | virus}

set trapportv1_local <port_int>

set trapportv1_remote <port_int>

set trapportv2c_local <port_int>

set trapportv2c_remote <port_int>

set trapv1_status {enable | disable}

set trapv2c_status {enable | disable}

end

Related topics

system snmp sysinfo

system snmp threshold

Previous
Next