Setting a FortiAP device on a map or floor plan
Use this procedure to set the position of a FortiAP device on a map or floor plan.
Prerequisites
- Complete the Adding a floor plan to FortiLAN Cloud procedure, if you want to set a FortiAP device on a floor plan.
- Identify the site that has the map or floor plan that you want to set the FortiAP device on. Go to Access Points > Map View.
Procedure steps
- To move a FortiAP device to the site that has the map or floor plan that you want to use:
- In the Menu bar, click Access Points.
- In the Navigation pane, click Edit View.
- In the first column of the table, select the checkbox for the FortiAP device that you want to move.
- Click Edit Configuration > Site.
- Select the site and click Apply.
- To set the position of a FortiAP device on a map or floor plan:
- In the Navigation pane, click Map View and then select the site that includes the FortiAP that you want to use.
- Click
and select Set AP Position. - Click and drag
to the desired position on the map or floor plan. - Click Close.
The map or floor plan shows the FortiAP device.
The following image shows an example of an AP set on a floor plan:
